Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrack Realignment in Selma, TX
When your garage door starts binding, making a grinding noise, or hanging up halfway through its travel, the tracks are usually the culprit. In Selma, TX, where the summer heat can cause metal frames to expand and contract against older foundations, track misalignment is a common issue we handle daily. If your door isn’t moving smoothly, you need an adjustment before the rollers pop out or the cable snaps. Our Garage Door Repair services cover everything from track alignment to full system checks. At Otto’s Garage Door, we specialize in getting those tracks back into perfect vertical and horizontal alignment so your door operates safely and quietly. We serve the entire Selma area and have been doing this since 2004. If you are dealing with a stuck or noisy door, call us today at (830) 268-9233 for an honest assessment.
We are a locally owned and owner-operated business. When you call us, you aren’t talking to a national call center; you are often talking to me, Otto Reinhardt. I believe in giving you a straight answer about whether your tracks just need a simple adjustment or if there is deeper damage to the rollers or the door itself. You can find more about our broader Garage Door Repair in Selma services on our main page, but for track-specific issues, we focus on precision measurements and structural integrity. We don’t guess, and we don’t upsell. We fix what is broken.
When You Need Track Realignment
You don’t always need a full replacement when your door acts up. Often, it is just a matter of tightening mounting brackets or adjusting the track spacing. Here are the warning signs that it is time to have a professional look at your tracks:
- The door is binding or hesitating: If your door stops, jerks, or slows down at the same spot every time it opens or closes, the track is likely bent or misaligned at that specific height.
- Loud grinding or scraping noises: Metal-on-metal sounds suggest your rollers are dragging against the track rather than rolling inside it, which happens when the track spacing is too tight or skewed.
- The door looks crooked: If the door appears lower on one side or leaves a gap between the door and the weather seal at the bottom, the tracks are likely uneven, causing the door to hang at an angle.
- Rollers are popping out: This is a major safety issue. If you see rollers leaving the track, stop using the door immediately. A door is 200 pounds riding on two springs; it is dangerous to operate if it isn’t secured properly.
- Visible dents or kinks: Inspect the vertical tracks near the floor. In busy garages, it is easy to bump the track with a car or a heavy tool, creating a crimp that prevents the roller from passing.
If you notice any of these, do not force the door. Trying to power through a jam can burn out your opener motor or break a cable, turning a simple alignment job into a much more expensive Cable Repair. We offer a 90-Day Done Right Promise on every job, so you can trust that our fix holds up. Whether you have a Craftsman or a Raynor system, we have the tools to get it back on track.
Our Track Realignment Process
Realignment isn’t just about banging a track back into place with a hammer. It requires precision and an understanding of how the entire door system balances. When we arrive at your Selma home, here is how we handle the job:
- System Inspection: We first verify that the issue is indeed the track and not a damaged roller, a bent hinge, or a frayed cable. We inspect the mounting bolts to see if the track has simply shifted over time.
- Safety Check: Before we touch the tracks, we ensure the door is balanced and the springs are under control. Safety is our priority, and we ensure the area is clear of tension hazards.
- Loosening and Adjustment: We loosen the mounting brackets on the vertical and horizontal tracks. Using a level and a plumb bob, we realign the track to the exact manufacturer specifications for your specific model, whether it is an Amarr or a Wayne Dalton door.
- Spacing Verification: We check the clearance between the roller and the track. It needs to be precise-too tight and it drags, too loose and it rattles. We adjust the track width so the rollers glide without resistance.
- Securing and Testing: We tighten all mounting bolts and brackets, ensuring they are flush against the wall or jamb. We cycle the door multiple times to ensure the hesitation is gone and the door seals properly at the bottom.
I will be there myself-the name on the van is the name on the invoice and the name on the license. We don’t cut corners because we have to live in this community, too.
Track Realignment Pricing in Selma
We believe in upfront pricing. You will never see a price change between the phone conversation and the moment we pull into your driveway. Track realignment is generally one of our more straightforward services, but How Much Does Garage Door Repair Cost? (2026 Price Guide) - Selma, TX depends on whether the track is simply loose or if it has been physically damaged and requires reshaping.
| Service Type | Estimated Price Range |
|---|---|
| Standard Track Adjustment | $95 – $165 |
| Track Repair (Minor Dents/Crimping) | $145 – $225 |
| Replacement of One Track Section | $185 – $290 |
If your tracks are beyond repair, we will tell you honestly. We offer a Free Second Opinion on any written estimate you have received from another company. We also provide a $40 discount on any repair over $200. If you are a senior or a veteran, you get an additional 10% discount on top of that-always. Call us at (830) 268-9233 to get a clear quote for your specific repair.
FAQs - Track Realignment
Can I fix a bent garage door track myself?
We strongly advise against trying to hammer out a bent track yourself, especially if you aren’t familiar with garage door mechanics. The tracks hold the door in place, and if you accidentally dislodge a roller while the door is under tension, the door can fall or twist, which is incredibly dangerous. A door is 200 pounds riding on two springs; respect it. Call us at (830) 268-9233 so we can handle it safely.
Is it cheaper to repair the track or replace the whole door?
In almost every case, repairing or realigning the track is significantly cheaper than replacing the entire door. Unless your door has suffered catastrophic damage from a vehicle impact, we can usually restore the tracks to perfect working order for a fraction of the cost of a new installation. We will always give you an honest assessment of whether a repair is worth it.
How long does a track realignment take?
Most track alignment jobs in Selma take between 45 minutes and an hour and a half. Because we are locally owned and owner-operated, we carry the necessary tools and common hardware on our truck, so we don’t have to make multiple trips or wait for parts. We get in, fix the issue, and get your garage back to working order.
Do you offer emergency service if my door is stuck open?
Yes, we answer the phone 24/7. If your door is stuck open, it isn’t just an inconvenience; it is a security risk. Whether it is nine at night or the middle of the weekend, call us. I personally answer the calls, and I will let you know when we can get there to secure your property. We have been serving this county since 2004, and we know how important it is to keep your home secure.
If you are searching for Garage Door Repair Near Me in Selma, TX because your door just won’t move right, stop fighting it. Give us a call at (830) 268-9233. We provide free estimates, no trip charges inside the county, and a 90-Day Done Right Promise. We would rather keep a customer for twenty years than win one big ticket, and that shows in every job we do.
Written by Otto Reinhardt, Owner at Otto’s Garage Door, serving Selma.