Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterTrusted Garage Door Repair for Selma Homeowners
A garage door that won’t open, won’t close, or sounds like a gunshot when the spring lets go is more than a nuisance. It’s a 200-pound machine over your head, your car, and half your morning routine. In Selma, we fix doors the same day you call, and we quote the job before we roll the truck. Otto’s Garage Door has been locally owned and owner-operated since 2004, with Otto Reinhardt’s name on the van, the license, and the invoice. When you call (830) 268-9233, a live person answers. Often that person is Otto himself. He’ll quote your repair on the call and hold that number when he gets to your driveway. No call center. No gatekeeper. No surprise billing. Just a straight answer from someone who has worked on Selma doors for over two decades.
What Our Garage Door Repair Service Includes
Garage door repair covers a lot of ground, because a door is a system, not a part. When something fails, the fix usually involves one of six areas. Here’s what we actually do in each, and when you need it done.
Panel Replacement
A bent or dented panel doesn’t just look bad. It throws the door’s weight out of balance, which wears the springs faster and makes the opener work harder than it should. We handle Panel Replacement for single panels or full sections, match the color and style as best as the manufacturer allows, and check the door’s balance before we leave. In Selma, storm damage and driveway mishaps are the two most common reasons we replace panels.
Spring Repair
Springs do the heavy lifting, literally. Your door weighs 150 to 250 pounds, and the springs carry that load every time the door moves. They’re rated in cycles, not years, and when one breaks, the door isn’t going anywhere until it’s replaced. This is the one repair we tell people never to attempt themselves. A high-tension spring under load can release with lethal force. We replace both springs at once, because when one goes, the other isn’t far behind, and we balance the door so the opener doesn’t burn out early.
Cable Repair
Cables work with the springs to guide the door up and down the track. When a cable frays or snaps, the door can drop on one side or seize entirely. Our Cable Repair service replaces galvanized and stainless cables, re-spools them on the drums, and inspects the track alignment so the new cable doesn’t wear out prematurely. If you see a loose cable hanging from the side of the door, keep your hands away from it and call us. That cable is under tension even when it looks slack.
Track Realignment
Tracks hold the door in line. If the door shakes, rubs, or sticks partway up, the tracks are often out of alignment, which stresses the rollers, the opener, and the panels. We realign vertical and horizontal tracks, re-anchor loose mounting brackets, and check the clearance at every roller. It’s amazing how many “opener problems” turn out to be track problems once we put a level on them.
Roller Replacement
Rollers wear out. Steel rollers get noisy, nylon rollers lose their bearings, and old rollers in a misaligned track can chew up the track itself. We do Roller Replacement in sets, not one at a time, so the door rides evenly and quietly. If your door sounds like it’s dragging a chain across concrete, the rollers are often the first thing we check.
Sensor Calibration
Modern openers have photo-eye sensors near the floor on both sides of the door. When they’re out of alignment, dirty, or damaged, the door refuses to close, blinks its lights, and startles you into resetting the opener. We perform Sensor Calibration to clean, align, and test the sensors, replace them if they’re failed, and verify the reverse mechanism actually reverses. A sensor that doesn’t work is a safety feature that isn’t protecting your kids, your pets, or your car.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Garage Door Repair
We work on everything, but we know some brands better than most. Amarr doors are common in Selma, and we’ve replaced hundreds of Amarr panels and springs over the years. Their torsion spring systems are straightforward to service, but the panel profiles vary by model year, so we keep a color and style reference on hand to match replacements as close as the current line allows.
Wayne Dalton doors have a unique TorqueMaster spring system that works differently from standard torsion springs. A lot of handyman services won’t touch them because they don’t carry the parts. We do. Craftsman openers and doors are everywhere in the older Selma neighborhoods, and we’ve seen every failure mode they can produce. Raynor doors are less common but they’re built like tanks, and when they do need work, it’s usually a matter of rusted hardware or worn rollers after fifteen years of Texas sun. Whether you have one of these brands or something else entirely, we service it, and we stock or can source the parts fast.
Signs You Need Garage Door Repair Right Now
- Your door sounds like a shotgun blast. That’s a spring snapping. The door will not open, and if you’re inside the garage when it happens, you’ll know it immediately. Call us. We carry springs for all the common Selma door sizes on the truck.
- The door opens a few inches and stops. That’s often a cable off the drum, a broken spring, or a door binding in the track. Each one gets worse if you keep pressing the opener button and forcing it. Stop pressing. Call instead.
- The door shakes or shudders when it moves. Worn rollers, loose hardware, or a door out of balance will shake the whole frame and eventually break something expensive. It’s a $150 repair if you catch it now, and a $600 replacement if you wait until the panel cracks.
- One side of the door hangs lower than the other. That means a cable has slipped, a spring is weak, or a track is bent. A door that hangs crooked puts uneven load on everything else, and it will only get worse. We can often correct it in a single visit.
- The opener runs but the door doesn’t move. The operator is doing its job, but the disconnect has let go or the gear inside the opener has stripped. Either way, don’t keep hitting the remote. We’ll diagnose it, tell you the exact fix, and give you the price before we start any work.
Our Garage Door Repair Process - Step by Step
- 1
You call, a human answers. Day or night, you get a live person on the phone. Tell us what the door is doing, or not doing. We’ll ask a few questions and give you a price range on the spot. If it’s an emergency, we tell you when the truck will arrive and we keep that promise.
- 2
We inspect the whole door, not just the broken part. When Otto or one of his crew shows up, the first thing we do is look at the whole system: springs, cables, tracks, rollers, hinges, opener, sensors. A broken spring is often the symptom of something else, like a door rubbing against a wall or an opener that never got rerated for spring fatigue.
- 3
We quote the exact price before we touch anything. The number we gave you on the phone gets confirmed at the door, item by item. If the inspection turns up something else, we show you what we found before we do anything about it. You agree to the price, in writing, before a wrench comes out.
- 4
We fix it right the first time. We carry the common parts on the truck: springs, cables, rollers, sensors, hinges, opener gears. Most repairs are done in one visit, usually under an hour for a straightforward spring or roller replacement. We test the door through full cycles, rebalance it, and set the opener limits and force settings.
- 5
You get the 90-Day Done Right Promise in writing. Every job ends with an invoice that has the warranty in plain English: if it’s not done right, we make it right, and one call brings Otto back. No runaround, no third-party warranty line. Just us, showing up and standing behind the work.
How Much Does Garage Door Repair Cost in Selma?
Garage door repair in Selma typically runs from $150 to $600, depending on what’s broken and how long it’s been left that way. Here’s what we charge in this market, and these are the numbers we hold ourselves to:
| Repair Type | Price Range |
|---|---|
| Spring Repair | $180 - $340 |
| Cable Repair | $130 - $250 |
| Opener Repair | $120 - $320 |
| Panel Replacement | $250 - $500 |
| Track Realignment | $120 - $240 |
| Roller Replacement | $110 - $220 |
What changes the price? The main factors are whether you have one spring or two, whether the opener needs a new circuit board or just a gear, and whether the door has been forced through a misaligned track long enough to damage the panels. A broken spring caught early is a $200 fix. A broken spring left for weeks that then snaps a cable and bends a track can push toward $600. The fastest way to avoid paying more than you have to is to call us when the door first starts acting up, not when it stops working entirely.
We also run a permanent $40 Off Any Repair Over $200, and a 10% discount for seniors and veterans. A Free Second Opinion on any written estimate, no trip charge inside our home county. And every price is quoted and agreed before any work starts. The number Otto quotes on the phone is the number on the invoice.
Garage Door Repair Near Selma - Our Service Area
We’re based in the Selma area and run calls all over this corner of the county. Most days we’re in Garage Door Repair in Live Oak within twenty minutes, and we regularly serve Cibolo, Converse, Windcrest, Hollywood Park, Alamo Heights, Timberwood Park, Olmos Park, St. Hedwig, and China Grove. If you’re in Garage Door Repair in Universal City, we’ve got you covered too. Same-day service in Selma is the standard, not the exception. If you’re within a few miles of our shop, Otto is often there before the coffee finishes brewing. You can always check our home page for the full list of communities we serve and the current service offers.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Garage Door Repair in Selma
Garage door repair is the diagnosis and correction of any failure in the door system: the springs, cables, tracks, rollers, hinges, panels, opener, or safety sensors. In practice, it means identifying what’s actually broken, fixing that, and then checking that the rest of the system still works the way it should. Most Selma repair calls involve springs, cables, or rollers, and most are resolved in a single visit.
Most repairs take one to two hours from the time we arrive. A spring or roller replacement is often done in under an hour. If we need a custom panel or a rarely stocked part, we’ll tell you that before we start, and we’ll give you a realistic timeline for the follow-up visit.
Expect to pay $150 to $600 for most residential garage door repairs in this area. A simple roller replacement is $110 to $220, a spring replacement is $180 to $340, and a panel replacement runs $250 to $500. The quote is given before the work begins and never revised upward at the door. Call (830) 268-9233 for an exact quote, no obligation.
Yes. We’ve serviced all of those brands for over twenty years, and we carry common parts for most of them on the truck. We won’t upsell you on a new door when the one you have is fixable. If we recommend replacement, it’s because the repair would cost more than half the value of a new door, and we’ll show you the numbers so you can make the call yourself.
Yes. We keep same-day slots open for Selma homeowners, and we answer the phone 24/7. A broken spring at 9 p.m. is an emergency, because your vehicle is sealed in the garage and your house’s main entry may be through that door. Call (830) 268-9233 and we’ll tell you exactly when the truck will be there.
Every job carries the 90-Day Done Right Promise, written on the invoice in plain English. If anything we fixed goes wrong within ninety days, one call brings Otto back to make it right. Parts we install also carry their manufacturer’s warranty where applicable, and we’ll tell you what that covers before you pay.
Clear a path in front of the door and park any vehicles outside if possible. Move anything leaning against the walls near the tracks so we can work freely. You don’t need to have tools, manuals, or anything else ready. If you have the original remote or keypad, having those handy helps us test the opener after we’re done.
Schedule Your Garage Door Repair Service in Selma Today
If your door is acting up, don’t wait for it to fail completely. Call Otto’s Garage Door at (830) 268-9233 and get a straight answer, an upfront price, and a repair done right the first time. We’ve been fixing Selma doors since 2004, and Otto answers his own phone. If you need us now, we’re ready. If you just want a second opinion on a quote you already got, we’ll do that too, free. The name on the van is the name on the license and the name on the invoice. That’s not a slogan. That’s how we do business.
Written by Otto Reinhardt, Owner at Otto’s Garage Door, serving Selma since 2004.